砝碼磁化率對質量測量過程的影響 根據砝碼磁性參數的測量原理,針對磁性測量中示值穩定性的影響量行分析,提出影響砝碼磁性參數測量中示值穩定性的關鍵影響量.采用zui稱量5.1 g、分辨率0.1μg的磁化率計行砝碼磁性測量,測量過程中分別同步測試振動的變化和環境磁場的變化,通過實驗數據分析,驗證了環境磁場的波動是影響砝碼磁性測量的關鍵影響量. Abstract：
According to the measurement principle of weight magnetic parameter, the influence of reading stability for measuring magnetism is analyzed, and the key influence of reading stability is presented in the measurement process. The magnetism of weight is measured by the magnetic susceptometer with capacity of 5.1 g and resolution of O. 1 μg. At the same time the change of environmental vibration in the laboratory and the fluctuating of ambient magnetic field are measured respectively. The experimental results show the fluctuating of ambient magnetic field that is the key influence of weight magnetism measurement. 砝碼磁化率對質量測量過程的影響 套裝砝碼規格
≮≯20kg~10kg10kg~1kg.5kg~1kg.2kg~1kg.2kg~1mg.1kg~1mg
≮≯500g~1mg.200g~1mg.100g~1mg.500mg~1mg.500mg~10mg.50mg~1mg 單個砝碼規格
≮≯20kg.10kg.5kg.2kg.1kg.500g.200g.100g.50g.20g.10g.5g
≮≯2g.1g.500mg.200mg.100mg.50mg.20mg.10mg.5mg.2mg.1mg
≮≯砝碼等級：E1 E2 F1 F2 M1 M2
≮≯砝碼材質：JF-1無磁不銹鋼標準砝碼 無磁不銹鋼標準砝碼 不銹鋼標準砝碼 鋼制鍍鉻標準砝碼 鑄鐵 標準砝碼
≮≯砝碼外形：鎖式、圓柱型、長方型，滾動型、掛勾式、板形、片形、圈（環）形、騎形、條（棒）形 準確度等級的定義
≮≯E2 等級砝碼：用于檢定傳遞F1 等級及其以下的砝碼。
≮≯F1 等級砝碼：用于檢定傳遞F2 等級及其以下砝碼
≮≯F2 等級砝碼：用于檢定傳遞M1 等級.M12 等級及其以下的砝碼。
≮≯M1 等級砝碼：用于檢定傳遞M2 等級.M23 等級及其以下的砝碼。
≮≯M2 等級砝碼：用于檢定傳遞M3 等級砝碼.用于檢定相應的衡量儀器。
≮≯M3 等級砝碼：用于檢定相應的衡量儀器，和與相應的衡量儀器配套使用。
≮≯M12 等級和M23 等級砝碼：用于檢定相應的衡量儀器，和與相應的衡量儀器配套使用。
|
